"

✅竞博电竞✅( lbwlbw.com )竞博电竞,品牌游戏公司,顶级原生态APP,多款游戏集于一体,信誉有保障,7*24小时优质服务,欢迎您!

              
              

                      "
                      歡迎來到北京多多賓城建筑機械有限公司
                      010-61441596
                      永光機械
                      永光機械
                        Product

                      產品展示

                      產品展示PRODUCT

                      GQ40C型鋼筋切斷機


                      GQ40C型鋼筋切斷機主要技術參數(鋼筋抗拉強度σb500Mpa以下)

                      GQ40 Reinforcing Bar Cutting Machine technical parameters (reinforced ultimate tensile strength σb500Mpa below)

                       

                      項目/型號Item/Model

                      GQ40C

                      切斷鋼筋最大直徑(mm

                      Maximum Cutting Steel Bar Diameter

                      φ6-φ40

                      切螺紋鋼最大規格(mm

                      Cutting Deformed Steel Bar Diameter

                      級螺紋鋼

                      Grade II Thread steel

                      φ6-φ32級螺紋鋼)

                      Ⅲ級螺紋鋼

                      Grade ⅣThread steel

                      φ6-φ28(Ⅳ級螺紋鋼)

                      切刀公稱沖程(mm

                      Cutting Knife Nominal Stroke

                      34

                      連續切斷次數(次/minContinuous Cutting Off Times

                      32

                      電動機型號Motor Model

                      Y100L-2

                      電動機功率Motor Power

                      3.0Kw

                      額定電壓Rated voltage

                      380 V±5%

                      電動機轉速Motor Rotating Speed

                      2880r/min

                      外型尺寸(mmDimensions

                      1260×530×730

                      包裝尺寸(木箱出口型)

                      Package Size(wooden box export)

                       

                      整機質量The Whole Weight

                      350±10Kg

                       


                      品牌型號  :  GQ40C 

                      GQ40C鋼筋切斷機,適用于建筑工程上各種鋼筋混凝土中普通碳素鋼及熱軋圓鋼和螺紋鋼的切斷,為您的施工降低大量的人力,大幅提高功效竞博电竞。該機具有以下特點。

                      1、  體積小竞博电竞、結構緊湊、噪音低,沖程大竞博电竞。

                      2、  潤滑性能好:采用箱式封閉結構,齒輪飛濺潤滑(油面應不高于油標刻線,使機器始終處于適當的潤滑狀態)

                      3、  功率損耗少:因潤滑條件的改善,齒輪軸端采用滾動軸承,阻力小竞博电竞,與同類切斷機相比同負載時功率損耗可降低三分之一。

                         移動方便:四輪著地,機動靈活,穩定可靠竞博电竞,維修方便

                       GQ40C Reinforcing Bar Cutting Machine, is usedto cut off all kinds of normal carbon steel, The cross-section of the steel bar end cut by this machine is very parallel andlevel, which can be directly for threading working. It reduce the worker numberand improve the efficiency significantly. This machine has the

                      followingcharacteristics.

                      1. Small volume, compactstructure, low noise, large stroke.

                      2. Lubricating performance: adopt the box-typeclosed structure, gear splash lubrication (oil surface should notbe h    igher than standard oil

                      groove, so that the machine is always in a properlubrication state)

                      3. Less power loss: due to the improvement oflubrication condition, gear shaft end uses rolling bearings, theresist    ance is small, compared

                      with the same kind of cutting machine, the power loss can bereduced

                      by 1/3.

                        Convenient movement: the four wheelson the ground, flexible, stable

                       and reliable, convenient maintenance.


                      Copyright 2017 北京多賓城建筑機械有限公司 All Rights Reserved
                      技術支持:企迪網絡
                      竞博电竞